Seal Gen2 16.5

12/24V DC severe duty winch rated at 16,500 lb pulling meets or exceeds your expectations.
Heavy duty series wound motor equipped with thermal switch alters when motor over-heating.
4 equally positioned pin holes with an ergonomic T-handle make it possible to reposition in 90 degree Increments.
Water-proof remote control with thermometric LED indicator w/5 m cord
Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch
The U.S. Germany, U.K. France, etcpatented mechanical cone brake outside the drum expedites heat dispersion. The greater the load on the rope, the greater amount of braking is generated by the mechanism.
Meets international standards of CE Machinery Directive 2006/42/CE, CE Electromagnetic Compatibility Directive 2014/30/EU, and SAE J706 Surface Vehicle standard 2003-08 rev.

Part number: PN 295615 (12V) / PN 295628 (24V)
Rated line pull: 7,484 kg / 16,500 lb single line
Line speed ( 1^st layer): 5.5 mpm / 18 fpm 50A at 12V, 7.5 mpm / 24.7 fpm 25A at 24V no load
1.4 mpm / 4.6 fpm 355A at 12V, 1.4 mpm / 4.6 fp, 245A at 24V full load
Motor: 4,325 w / 5.8 hp 12V series wound
4,474 w / 6.0 hp 24V series wound
Gear train: 3-stage planetary 343:1
Clutch (freespooling): Rotating ring gear
Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
Winch construction: Aluminum die cast housings with steel drum
Drum size: 89 mm x 204L mm (3.5" x 8"L)
Control: Waterproof remote with thermometric indicator LED w/ 5 m (17') cord
Rope type: 6 × 29 - IWRC
Rope size: 11.1 mm x 27.4 m (7/16” x 90’)
Mounting bolt pattern: 254 mm x 114.3 mm (10” x 4.5”)
254 mm x 165 mm (10" x 6.5")
Mounting: Foot forward mounting only
* Remark: Only foot forward mounting can meet SAE J706

Line Speed and Amp. Draw (1^st layer of wire rope on the drum):

Line Pull and Rope Capacity:

Warning

The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated line pull shown is based on the first layer of rope on the drum.
The rope winding on the drum shall remain 5 wraps from the drum.

Warranty

Limited lifetime warranty for mechanical components and three(3) year warranty for electrical components from date of purchase. Wire/Synthetic ropes are not included under warranty.

Standard Accessories:

Seal Gen2 16.5 Operation Manual	2022-04-28	PDF, 0.72 MB	Download
[QUICK START GUIDE] Connecting the cables of the control box to the motor terminals (triangle type)	2021-07-31	PDF, 0.34 MB	Download