Rhino 12 Pro

NEW

Reliable electric winch for commercial, industrial and severe duty applications
4,180w/12V or 2,690w/24V series wound motor.
10 equally positioned pin holes with a ergonomic T-handle make it possible to reposition in 36 degree increments.
Patented over-loading current protector can be programmed by the winch specification and pulling requirements which limits the winch's maximum pulling power.
LED Indicator displays detailed winch status while operating.
U.S. Germany, U.K. France, etc patented mechanical cone brake holds the full load without slipping.
Easy to turn the T-handle for rapid wire rope payout.
Submersible sealed contactor handles high amps and allows higher duty cycle.
Meets SAE J706, CE Machinery Directive 2006/42/EC, and EN 14492-1 standards

What's News Link: KAIZEN: Rhino Pro Series Electric Recovery Winches

Part number: PN 851105 (12V) / PN 851324 (24V)
Rated line pull: 5,440 kg / 12,000 lb (SAE J706 rating)
5,100 kg (EN 14492-1 rating)
Motor: 4,180 w / 5.6 hp 12V series wound
2,690 w / 3.6 hp 24V series wound
Gear train: 3-stage planetary 315:1
Clutch (freespooling): Rotating ring gear
Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
Winch construction: Aluminum die cast housings with steel drum
Drum size: 114 x 195.5 mm (4.5” x 7.7")
Rotation of winch: Wire rope shall be under-wound orientation only
Control: Waterproof remote with thermometric indicator LED w/ 5 m (17') cord
Mounting bolt pattern: 254 x 114.3 mm (10” x 4.5”)
254 x 165.1 mm (10" x 6.5")
Wire rope recommended:
* 12 mm x 21.4 m, 1,960 N/mm² grade with a minimum breaking strength of 100.5 kN required for EN 14492-1 rating.
* 1/2" x 100', EIPS grade with a minimum breaking strength of 22,552 lbf required for SAE J706 rating

The working coefficient for the first rope layer on the drum shall be at least 2.
The D/d ratio to the center of the rope shall be at least 10 for the drum.
Drum freeboard shall be at least 1.5 x rope diameter.

Line Speed and Amp. Draw (1^st layer of wire rope on the drum):

Line Pull and Rope Capacity:

Warning

The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated line pull shown is based on the first layer of rope on the drum.
The rope winding on the drum shall remain 5 wraps from the drum.

Warranty

Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.

Standard Accessories	Option Accessories
Roller fairlead Remote control w/5 m (17’) cord Detachable control box	Cable tensioner Current Regulator

Rhino 12 Pro Operation Manual

2023-07-20

PDF, 0.62 MB