HV-15
15,000 lb Hydraulic Recovery Winch
- Powered by an onboard hydraulic pump or PTO for variable recovery speeds for high working rate.
- 9.5 in3 / rev highly efficient and constant operating torque motor with 15,000 lb capacity.
- Hardened 2 stage planetary gear train with 19.4:1 gear ratio provides faster line speed.
- Turn clutch by a ergonomic T-handle for rapid wire rope payout.
- Drag brake and over-center valve provided for holding full load.
- Great for severe duty trailers, roll-back carriers, and commercial recovery application.
- Meets SAE J706 revised AUG2003, CE Machinery Directive 2006/42/EC and EN 14492-1 Power Driven Winches.
SPECIFICATIONS
- Part number: PN 686732 (Std. drum) / PN 687548 (Std. drum - Clutch in left side)
- Rated line pull: 6,800 kg / 15,000 lb (EN 14492-1 rating & SAE J706 rating)
- Line speed (at 1st layer of rope) : 9 mpm at 60 l/min (30 fpm at 15.9 g/min)
- Operation pressure: 150 bar / 2,175 psi
- Max oil flow: 60 l/min (15.9 g/min)
- Hydraulic motor: 156 cm3/rev (9.5 in3/rev)
- Gear ratio: 2-stage planetary gear 19.4:1
- Winch construction: Aluminum die cast housings with steel drum
- Clutch (Freespooling): Rotating ring gear
- Brake: Spring applied drag brake together with over-center valve supplied
- Rotation of winch: Wire rope shall be under-wound orientation only
- Drum barrel diameter: 127 mm (5")
- Drum flange diameter: 252 mm (9.9”)
- Distance between flanges: 255 mm (10")
- Mounting bolt pattern: 303.5 x 114.3 mm (12” x 4.5”)
368.5 x 171.2 mm (14.5” x 6.7”) - Wire rope recommended:
14 mm x 27 m (9/16" x 89') 1,960 N/mm2 (EIPS) grade with a minimum breaking strength of 137 kN (30,742 lbf) required for SAE J706 and EN 14492-1 ratings
Compliant with EN 14492-1 requirements for recovery winches:
- The working coefficient for the first rope layer on the drum shall be at least 2.
- The D/d ratio to the center of the rope shall be at least 10 for the drum.
- Drum freeboard shall be at least 1.5 x rope diameter.
Copyright © COMEUP INDUSTRIES INC., All Rights Reserved.